How to find Solid Swivel

 

  1. Turn off M5 at junction 4 sign posted A491 Stourbridge.
  2. Keep on A491 for about 5 miles until you reach a very large roundabout sign posting to the left Kidderminster A456. Take the 3rd exit sign posted Birmingham A456.
  3. After 200 yards as you approach traffic lights, bear left to Stourbridge A491.
  4. After ½ mile you will approach an island take third exit A4036 to Dudley.
  5. Proceed over the next island.
  6. Carry on through the next 2 sets of traffic lights at Lye.
  7. Go straight over the next island.
  8. You are then on a short dual carriageway with a park on your right.
  9. As you near the traffic lights stay in the right hand lane.
  10. Indicate right and enter the slip lane signposted A4100 Cradley Heath.
  11. After about a mile look for a railway station on your right. At the bend by the station, turn right into the road A4173 Cradley (it runs parallel to the rail line). DO NOT turn sharp right into the level crossing.
  12. After 400 yards, at the crossroads turn right under the railway bridge, then immediately left into Portersfield Road.
  13. We are about 250 yards up on the right. Please park on the front car park or on the road between our 2 roller shutter doors.
  14. Reception is in the green office block.
  15. Allow around 20 minutes from the M5 junction 4 & have a safe journey.

 

 

To find Solid Swivel and Solid Stampings:

 


  1. Click View Google Map Below.
  2. View Google Map
  3. Click the blue search button.
  4. Our factory will be shown by a red icon 'A' (click the close button showing our address)
  5. If you now zoom out, the red icon remains, showing our location.
  6. By clicking 'Directions' on the top left of the page and adding your start point, you will obtain directions to our company.

 

 

 

 

 

Back to Contact Details

Back to top